perma Lubrication systems for Conveyors

Functioning conveyors are essential for smooth process flows.

Despite dirt, dust or strong vibration, optimal lubrication is necessary to prevent equipment failures. Costly repairs and service visits represent a significant part of operating costs, which can be minimised significantly by using perma lubrication systems.

Contact

Challenges

Large conveyors often extend over long distances and several levels and are difficult to access. Relubrication should ideally take place while the equipment is running. Many transfer points can only be lubricated with the help of catwalk grating or work platforms and are therefore often neglected. Accident prevention and workplace safety must be ensured at all times.

Lubrication starvation results in wear, leads to failure of equipment components and reduces productivity and cost effectiveness.

Dirt and water must not enter the lubrication points

No unnecessary equipment downtimes due to relubrication

Workplace safety must be ensured

Lubrication points

Pillow block housings with spherical roller bearings are mainly used for drive and bend pulleys.

Bearings and bearing housing seals must be permanently supplied with lubricant.

Solutions

Mount a perma lubrication system at the lubrication point. Depending on the conditions prevailing at the lubrication point, the perma lubrication system can either be mounted directly or remotely.

Direct mounting on the lubrication point: e.g. perma CLASSIC

Easy, quick mounting
For lubrication points with little vibration / shocks
For easy-to-reach, safe lubrication points

Remote mounting to the lubrication point: e.g. perma STAR VARIO

For lubrication points with strong vibration / shocks (isolation of lubrication system)
For lubrication points which are unsafe to access: Mounting in safe areas
For hard-to-reach lubrication points