perma NOVA was specifically developed for single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, shaft seals and chains located in areas with considerable temperature variations (e.g. outside installations). The lubrication system is protected against dust and water jets, subject to correct assembly of the individual parts (IP65). perma NOVA with LC 65 cm³ is ideal for the lubrication of electric motors.
Conveyors
Electric motors
Pumps
Roller bearings
Sliding bearings
Open gears
Spindles
Shaft seals
Chains
Blowers / Fans
Electronic control unit with temperature compensation displays discharge period / operating status
- LCD display and push buttons setting: 1, 2, 3 ... 12 months
- Discharge period setting independent of ambient temperature
- Accelerated pressure build-up for first discharge within one day
- Simple and safe handling
- Reusable NOVA Control unit
System operates reliably from -20 °C to +60 °C
- Universal use at both low and higher temperatures
- Temperature compensation permits use with heavily fluctuating ambient temperatures
- Extremely robust due to integrated support flange
Ex-proof certification
- Safe and reliable lubrication in explosive areas
- IP 65: Dust-tight and protected against water jets
- Increased workplace safety
| Drive | Electrochemical reaction via gas generating cell, Electronic temperature compensation |
|---|---|
| Housing | Transparent plastics |
| Discharge period | 1, 2, 3, ... 12 months |
| Lubricant volume | 65 cm³, 125 cm³ |
| Operating temperature | -20 °C to +60 °C |
| Pressure build-up | max. 6 bar |
| Number of outlets | 1 |
| Protection class | IP 65 |
| Lubricants | Grease to NLGI 2 / oil |
| Max. tube lengths | 2.00 m |
| CE | ✓️ |
| Ex | ✓️ |
| IEC Ex | ✓️ |
| ANZEx | ✓️️ |
Further information & contact
Our staff will be happy to advise you at any time. Commonly asked questions regarding this product are available in the FAQs section.
